This listing contains 3 PDFs to make your own woven, tree, bell and pinecone ornaments. This listing is for the digital pattern only and does not contain the physical product. Although this project requires little to no sewing, it requires coordination a pattern recognition to do the weave. I recommend you practice the weaving the ornaments before riveting anything down.
Tree is about 3 inches in length, bell is about 3 inches and pinecone is about 4 inches.
PDF is intended for letter/8.5" by 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video, as there are no written instructions.
This project requires:
For the tree:
- 2-3 oz leather regular to stiff
- Size 32 rivets, 5mm post, 5mm cap, 24
- Ring with screw on stud
For the bell:
- 2-3 oz leather regular to stiff
- Size 32 rivets, 5mm post, 5mm cap, 24
- Size 33 rivets, 7mm post, 7mm cap, 16
- Ring with screw on stud
For the pinecone:
- 2-3 oz leather regular to stiff
- Size 32 rivets, 5mm post, 5mm cap, 40
- Ring with screw on stud
- 0.8mm thread
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.
This listing contains 3 PDFs to make your own woven, tree, bell and pinecone ornaments. This listing is for the digital pattern only and does not contain the physical product. Although this project requires little to no sewing, it requires coordination a pattern recognition to do the weave. I recommend you practice the weaving the ornaments before riveting anything down.
Tree is about 3 inches in length, bell is about 3 inches and pinecone is about 4 inches.
PDF is intended for letter/8.5" by 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video, as there are no written instructions.
This project requires:
For the tree:
- 2-3 oz leather regular to stiff
- Size 32 rivets, 5mm post, 5mm cap, 24
- Ring with screw on stud
For the bell:
- 2-3 oz leather regular to stiff
- Size 32 rivets, 5mm post, 5mm cap, 24
- Size 33 rivets, 7mm post, 7mm cap, 16
- Ring with screw on stud
For the pinecone:
- 2-3 oz leather regular to stiff
- Size 32 rivets, 5mm post, 5mm cap, 40
- Ring with screw on stud
- 0.8mm thread
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.
