The PDF contains a 17 page pattern to make your own shield backpack.
The bag itself is about 15 inches in height and about 12.25 inches wide with the depth of 3 inches. This design requires precise cutting so ensure you're using a fresh blade. Due to the size of the project, all pattern pieces must be assembled before use.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for A4 and US letter 8.5" by 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video, as there are no written instructions.
Materials needed for this project:
- 5-6 oz regular to stiff leather
- 6-7 oz leather for straps
- 0.8mm thread
- 13 inch #5 metal zipper
- 1 inch rectangle rings 4
(2 narrow as strap keepers, 2 wide for straps)
- size 34 rivets 9mm cap, 8mm post 5
- 1 inch buckles 2
- size 33 rivets 7mm cap 7 mm post 24
- 1 inch rectangle ring, 6
- 12 inch #5 closed end zipper
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
The PDF contains a 17 page pattern to make your own shield backpack.
The bag itself is about 15 inches in height and about 12.25 inches wide with the depth of 3 inches. This design requires precise cutting so ensure you're using a fresh blade. Due to the size of the project, all pattern pieces must be assembled before use.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for A4 and US letter 8.5" by 11" paper print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video, as there are no written instructions.
Materials needed for this project:
- 5-6 oz regular to stiff leather
- 6-7 oz leather for straps
- 0.8mm thread
- 13 inch #5 metal zipper
- 1 inch rectangle rings 4
(2 narrow as strap keepers, 2 wide for straps)
- size 34 rivets 9mm cap, 8mm post 5
- 1 inch buckles 2
- size 33 rivets 7mm cap 7 mm post 24
- 1 inch rectangle ring, 6
- 12 inch #5 closed end zipper
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
