PDF Pattern Leather Raven Head Wall Mount
This purchase contains a 3 page PDF pattern to make your own Raven Head Mount.
This is not the physical product, only the digital pattern.
The the plaque about 8 inches long and protrudes about 6 inches. Due to its small size, I recommend using a softer leather, like an oil tan to make the raven head. Softer leather works better to define certain areas like the beak and neck.
Please go through the video to ensure you understand the steps before purchasing.
PDF is intended for letter/ 8.5" by 11" paper, print in actual size (100%)
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 4-5 oz medium stiff to soft leather (sample used oil tan)
- 5-6 oz stiff leather preferably veg tan for the plaque pieces
- 0.8mm thread
-(optional) Fiebing pro dye in Dark Brown
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.
This purchase contains a 3 page PDF pattern to make your own Raven Head Mount.
This is not the physical product, only the digital pattern.
The the plaque about 8 inches long and protrudes about 6 inches. Due to its small size, I recommend using a softer leather, like an oil tan to make the raven head. Softer leather works better to define certain areas like the beak and neck.
Please go through the video to ensure you understand the steps before purchasing.
PDF is intended for letter/ 8.5" by 11" paper, print in actual size (100%)
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 4-5 oz medium stiff to soft leather (sample used oil tan)
- 5-6 oz stiff leather preferably veg tan for the plaque pieces
- 0.8mm thread
-(optional) Fiebing pro dye in Dark Brown
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.
This purchase contains a 3 page PDF pattern to make your own Raven Head Mount.
This is not the physical product, only the digital pattern.
The the plaque about 8 inches long and protrudes about 6 inches. Due to its small size, I recommend using a softer leather, like an oil tan to make the raven head. Softer leather works better to define certain areas like the beak and neck.
Please go through the video to ensure you understand the steps before purchasing.
PDF is intended for letter/ 8.5" by 11" paper, print in actual size (100%)
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 4-5 oz medium stiff to soft leather (sample used oil tan)
- 5-6 oz stiff leather preferably veg tan for the plaque pieces
- 0.8mm thread
-(optional) Fiebing pro dye in Dark Brown
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.