PDF Pattern Leather Iron Maiden Key holder/ Key Pouch/ Key Wallet
This PDF contains a 2 page pattern to make your own iron maiden key holder. Rivets are decorative and are an optional part of the design. You might need to skive the snap hole area if your leather is too thick to install the snaps.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for letter paper 8.5" x 11" print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video.
Materials needed for this project:
- 3 oz regular to stiff leather
- 1 inch key ring
- 0.8mm thread
- Size 33 rivet (7mm post, 7mm cap) 20
- Line 20 (12.5mm) snaps 2
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.
This PDF contains a 2 page pattern to make your own iron maiden key holder. Rivets are decorative and are an optional part of the design. You might need to skive the snap hole area if your leather is too thick to install the snaps.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for letter paper 8.5" x 11" print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video.
Materials needed for this project:
- 3 oz regular to stiff leather
- 1 inch key ring
- 0.8mm thread
- Size 33 rivet (7mm post, 7mm cap) 20
- Line 20 (12.5mm) snaps 2
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.
This PDF contains a 2 page pattern to make your own iron maiden key holder. Rivets are decorative and are an optional part of the design. You might need to skive the snap hole area if your leather is too thick to install the snaps.
This listing is for the digital pattern only and does not contain the physical product.
PDF is intended for letter paper 8.5" x 11" print to actual size (100%). Every stitch has a 1/8 seam allowance with the stitching holes provided. Most of the stitching holes are spaced 4mm apart. If you are unsure please watch build along video before purchasing. Instructions are also provided in the build along video.
Materials needed for this project:
- 3 oz regular to stiff leather
- 1 inch key ring
- 0.8mm thread
- Size 33 rivet (7mm post, 7mm cap) 20
- Line 20 (12.5mm) snaps 2
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.