PDF Pattern Leather Full Face Teeth Mask
This purchase contains a 4 page PDF pattern to make your own Full Face Teeth Mask.
This is not the physical product, only the digital pattern.
Due to its size, I recommend using a thinner leather, like a 3-4oz veg tan for the teeth, while the rest can be made in 5-6 oz leather.
Please go through the video to ensure you understand the steps before purchasing.
PDF is intended for US letter/ 8.5" by 11" paper, print in actual size (100%)
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 3-4 oz leather for teeth
- 5-6 oz for everything else
- 0.8 mm thread
- 8mm post rivets 3
- 3/4 in buckle 1
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
This purchase contains a 4 page PDF pattern to make your own Full Face Teeth Mask.
This is not the physical product, only the digital pattern.
Due to its size, I recommend using a thinner leather, like a 3-4oz veg tan for the teeth, while the rest can be made in 5-6 oz leather.
Please go through the video to ensure you understand the steps before purchasing.
PDF is intended for US letter/ 8.5" by 11" paper, print in actual size (100%)
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 3-4 oz leather for teeth
- 5-6 oz for everything else
- 0.8 mm thread
- 8mm post rivets 3
- 3/4 in buckle 1
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
This purchase contains a 4 page PDF pattern to make your own Full Face Teeth Mask.
This is not the physical product, only the digital pattern.
Due to its size, I recommend using a thinner leather, like a 3-4oz veg tan for the teeth, while the rest can be made in 5-6 oz leather.
Please go through the video to ensure you understand the steps before purchasing.
PDF is intended for US letter/ 8.5" by 11" paper, print in actual size (100%)
Stitching holes are provided with 4mm distance between. If you are unsure, please watch the video first, before making purchase.
Materials needed for this project:
- 3-4 oz leather for teeth
- 5-6 oz for everything else
- 0.8 mm thread
- 8mm post rivets 3
- 3/4 in buckle 1
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.