PDF Pattern Leather Frog Coin Purse
This purchase contains a 4 page pattern to make your own leather Frog coin purse. The frog itself is about 12 inches long (not including the swivel hook) and 7.5 inches at the widest. This purse is big enough to hold card, cash, coins and more. Its best worn hooked on a belt.
A little warning before buying, the arms and legs are a little difficult to turn, due to the size of the hands an feet being larger than the wrists and ankles. Do not use leather thats thicker than 2oz for the limbs as it will make it next to impossible to turn inside out. The legs are also a bit tricky to stitch. I recommend you watch the build video before purchase to see what it entails.
This is not the physical product, only the digital pattern.
PDF is intended for US letter/ 8.5" by 11" paper, print at 100%.
Stitching holes are provided with 4mm distance between, although some areas will a have slightly wider distance to accommodate piece alignment. If you are unsure, please watch the video first, before making purchase. Instructions are also provided in the build along video, as there are no written instructions.
Materials needed for this project:
- 2 oz or less, soft leather, garment/lamb leather, thinner the better
- 2-3 oz stiff leather, for the body pieces, strap and zipper piece
- 0.8mm thread
- poly-fil/stuffing
- 1/2 inch swivel hook
- 5 inch #5 close end zipper
-Size 33 rivets (7mm post, 7mm cap)2
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.
This purchase contains a 4 page pattern to make your own leather Frog coin purse. The frog itself is about 12 inches long (not including the swivel hook) and 7.5 inches at the widest. This purse is big enough to hold card, cash, coins and more. Its best worn hooked on a belt.
A little warning before buying, the arms and legs are a little difficult to turn, due to the size of the hands an feet being larger than the wrists and ankles. Do not use leather thats thicker than 2oz for the limbs as it will make it next to impossible to turn inside out. The legs are also a bit tricky to stitch. I recommend you watch the build video before purchase to see what it entails.
This is not the physical product, only the digital pattern.
PDF is intended for US letter/ 8.5" by 11" paper, print at 100%.
Stitching holes are provided with 4mm distance between, although some areas will a have slightly wider distance to accommodate piece alignment. If you are unsure, please watch the video first, before making purchase. Instructions are also provided in the build along video, as there are no written instructions.
Materials needed for this project:
- 2 oz or less, soft leather, garment/lamb leather, thinner the better
- 2-3 oz stiff leather, for the body pieces, strap and zipper piece
- 0.8mm thread
- poly-fil/stuffing
- 1/2 inch swivel hook
- 5 inch #5 close end zipper
-Size 33 rivets (7mm post, 7mm cap)2
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.
This purchase contains a 4 page pattern to make your own leather Frog coin purse. The frog itself is about 12 inches long (not including the swivel hook) and 7.5 inches at the widest. This purse is big enough to hold card, cash, coins and more. Its best worn hooked on a belt.
A little warning before buying, the arms and legs are a little difficult to turn, due to the size of the hands an feet being larger than the wrists and ankles. Do not use leather thats thicker than 2oz for the limbs as it will make it next to impossible to turn inside out. The legs are also a bit tricky to stitch. I recommend you watch the build video before purchase to see what it entails.
This is not the physical product, only the digital pattern.
PDF is intended for US letter/ 8.5" by 11" paper, print at 100%.
Stitching holes are provided with 4mm distance between, although some areas will a have slightly wider distance to accommodate piece alignment. If you are unsure, please watch the video first, before making purchase. Instructions are also provided in the build along video, as there are no written instructions.
Materials needed for this project:
- 2 oz or less, soft leather, garment/lamb leather, thinner the better
- 2-3 oz stiff leather, for the body pieces, strap and zipper piece
- 0.8mm thread
- poly-fil/stuffing
- 1/2 inch swivel hook
- 5 inch #5 close end zipper
-Size 33 rivets (7mm post, 7mm cap)2
If there is a problem or instructions are unclear please message me, so I can assist you. It would be great to hear some feedback so I can continue to improve the patterns.
Please do not, sell, distribute, use for monetary gain, or commercial use.